부품 번호 537035-4

Fluid Passage Bolt

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 145.98 and 197.073 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
537035-4
비무장화:
Yes - DEMIL/MLI
수명:
N/A
측정 단위:
1 EA
NIIN:
006287245

부품 정보
Wrenching end thds has one hole 0.078in.Dia thru

NSN
국가 주식 번호:
4730-00-628-7245 4730006287245
TXT
묘사:
Fluid Passage Bolt
INC
INC
아이템 이름 코드:
18683
INC
COM
컴플라이언스:
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Body wrenching
MRC:
None.AAXC
Concentric Hole Diameter:
0.180 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.170 inches and 6.180 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACMR
Second End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.928 inches and 0.940 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.710 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATLF
Second End Thread Length:
0.615 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
MRC:
None.BBKL
First Diameter From Wrenching Feature:
Between 1.052 inches and 1.062 inches
MRC:
None.BBKM
Second Diameter From Wrenching Feature:
0.665 inches
MRC:
None.BBKN
Third Diameter From Wrenching Feature:
0.757 inches
MRC:
None.BBKP
Fourth Diameter From Wrenching Feature:
Between 0.660 inches and 0.662 inches
MRC:
None.BBKR
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.180 inches
MRC:
None.BBKS
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
1.680 inches
MRC:
None.BBKT
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
2.720 inches
MRC:
None.BBKW
Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter:
4.310 inches
MRC:
None.BBKY
First Radial Fluid Hole Diameter:
0.144 inches
MRC:
None.BBLB
Distance From First Radial Hole Center To End Of Bolt:
0.309 inches
MRC:
None.BBLD
Length From Bearing Surface Of Wrenching Feature To Bolt End:
5.020 inches
MRC:
None.BBLF
Wrenching Feature Height:
0.540 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
16
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.750 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CRMX
Second End Thready Qty Per Inch (tpi):
24
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CRNB
Second End Thread Size:
0.312 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CRPF
Second End Thread Series Designator:
Unf
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 federal specification single treatment response

{lang[cimilar]} Fluid Passage Bolts

« Hose, Pipe, Tube, Lubrication and Railing Fittings {lang[catalog]}
지금 비교»
맑다 | 숨기다