TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Relieved
Concentric Hole Diameter:
0.180 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.560 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.934 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.710 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
1.057 inches
Second Diameter From Wrenching Feature:
0.665 inches
Third Diameter From Wrenching Feature:
0.758 inches
Fourth Diameter From Wrenching Feature:
0.665 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.180 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
1.680 inches
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
2.720 inches
Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter:
4.310 inches
First Radial Fluid Hole Diameter:
Between 0.138 inches and 0.144 inches
Distance From First Radial Hole Center To End Of Bolt:
0.510 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
4.840 inches
Wrenching Feature Height:
0.720 inches
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
16
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.750 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Aaql
