MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
11.0 millimeters
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
66.0 millimeters
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
86.0 millimeters
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
32.0 millimeters
Outside Corner Radius:
10.0 millimeters
Side Radius From Gasket Center:
21.0 millimeters
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 1.02 millimeters and 1.27 millimeters
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: vehicle, commercial utility cargo (cucv); truck, vehicle system, 1 1/4-ton (hmmwv); truck, utility, cargo troop carrier, 5/4-ton w/w (m998); shipboard material handling equipment (mhe); tractor, aircraft towing, mb-4; shelter, chemically and biologically protected; aircraft, t-39
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Paper and glue or paper or rubber chloroprene class cr or paper and rubber polyisoprene natural class nr or rubber polyisoprene synthetic class ir or paper and rubber butadiene-acrylonitrile class nbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-g-12803 +3313b or p 3413a or +3415a or +3353b or +3464a or +3342f military specification all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
