부품 정보
0.156in.Dia hole in shank located 3.690 in.From bearing surface of head
MRC:
The length of a straight line which passes through the center of the eye and terminates at the inner periphery.AATK
Eye Inside Diameter:
Between 1.172 inches and 1.204 inches
Shoulder Thickness:
Between 0.203 inches and 0.235 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
Between 3.950 inches and 4.050 inches
Eye Stock Diameter:
Between 0.490 inches and 0.500 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 0.859 inches and 0.891 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.490 inches and 0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.575 inches and 6.675 inches
Distance From Center Of Eye To Shank End:
Between 4.638 inches and 4.674 inches
Eye Outside Width:
Between 2.046 inches and 2.078 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round, closed w/shoulder
