부품 번호 5280G1056

Helical Gear

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 31.26 and 42.201 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
5280g1056
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
002002049

부품 정보
Two puller holes equally spaced on 2.250 in. Diameter bolt circle, 0.750-16 unf 2a, 0.562 in. Deep countersunk, 0.438 in. Diameter by 90 deg, one timing mark hole 0.094 in. Diameter by 0.031 in. Deep, drilled on centerline of tooth, 36 degrees 28 min ccw from centerline of keyway

NSN
국가 주식 번호:
3020-00-200-2049 3020002002049
TXT
묘사:
Helical Gear
INC
INC
아이템 이름 코드:
05464
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.0840 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
21
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
10a w/ keyway both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
W/ keyway both ends
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
58.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.433 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Single helix
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The direction the teeth curve when viewed from the edge of the item.CWNM
Tooth Direction:
Left
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.5000 degrees
MRC:
The measurement of the helix angle on the item.CWPZ
Helix Angle:
31.6667 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
1.000 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.563 inches both ends
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
0.251 inches both ends
MRC:
The nominal distance from the center of the bore to the bottom of the keyway(s).CWSR
Distance From Bore Center To Keyway Bottom:
0.9106 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Hubless

{lang[cimilar]} Helical Gears

« Gears, Pulleys, Sprockets and Transmission Chain {lang[catalog]}
지금 비교»
맑다 | 숨기다