부품 정보
Inside diameter has flat surface with round top edges, 0.020 in. Min, 0.040 in. Maximum high parallel to outside edge of key; 0.275 in. Min, 0.285 in. Maximum flat to center distance
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.695 inches and 0.705 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.080 inches
External Tapered Key Width:
Between 0.540 inches and 0.560 inches
Tapered Key Major Width:
Between 0.270 inches and 0.280 inches
Overall Distance Including Keys:
1.400 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.058 inches and 0.059 inches
Angle Between External Keys:
Between 78.0 degrees and 82.0 degrees
External Prebent Key Angle:
Between 10.0 degrees and 20.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches bottom
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches top
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 305
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5514 assn standard single material response
