부품 번호:
524-66-3688-vhba-35
부품 정보
Two threaded slots on opposite sides of face, 0.375-16 unc
TXT
묘사:
Machine Thread Bushing
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
45.0
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
2.3741 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
Between 0.203 inches and 0.208 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.250 inches
MRC:
The physical configuration of the facility utilized to assemble or disassemble the item.ACSL
Wrenching Facility Shape:
Slotted
MRC:
The measurement of the process used to enlarge part of a hole,in distinction from height.ADBD
Countersink Depth:
0.060 inches
MRC:
A measurement of the extent of screw threads,including incomplete screw threads,along a line parallel to the longitudinal thread axis.AJYR
Screw Thread Length:
1.500 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
End opposite drive end
MRC:
Indicates the location of the countersink on the item.BQDD
Countersink Location:
Wrenching end
MRC:
The length of a straight line which passes through the center of the hole,and terminates at the inside circumference.BXBR
Hole Inside Diameter:
Between 2.000 inches and 2.002 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Counterbore and countersunk
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
8
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
3.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390 federal specification single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un
