부품 정보
Three additional grooves; first undercut radius 0.025 in. Nom 0.136 in. Min 0.141 in. Maximum undercut diameter adjacent to head; second groove 0.118 in. Min 0.148 in. Maximum w 0.140 in. Min 0.150 in. Maximum undercut diameter located 0.249 in. Min 0.259 in. Maximum from bearing surface of head; third groove 0.118 in. Min 0.148 in. Maximum w 0.140 in. Min 0.150 in. Maximum undercut diameter located 0.777 in. Min 0.787 in. Maximum from bearing surface of head
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.1858 inches and 0.1865 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.125 inches
Undercut Diameter:
Between 0.1735 inches and 0.1765 inches
Under Head Length:
1.265 inches
Undercut Width:
Between 0.018 inches and 0.020 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
36.0 rockwell c and 43.0 rockwell c
Pin Head Diameter:
0.312 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.140 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ws19168 cagec 5d286 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
