부품 정보
Hole located 0.095 in. From end of gear and on center line of tooth, circular groove 0.091 in. From end of gear, 0.081 in. Wide and 0.142 in. Deep
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
The means used to attach the item.ABSX
Attachment Method:
Mounting hole
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.4313 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
10
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Plain both ends
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for the specific diameter of a threaded mounting hole.CMLK
Mounting Hole Thread Series Designator:
Unc axially through body, first end
MRC:
The number of mounting hole threads per linear inch measured on a line parallel to the thread axis.CMLM
Mounting Hole Thready Qty Per Inch (tpi):
40 axially through body, first end
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 46.0 rockwell c
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 46.0 rockwell c
MRC:
A designation that is used for the purpose of general identification of the mounting hole thread.CQLT
Mounting Hole Thread Size:
0.112 inches axially through body, first end
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
1 threaded axially through body, first end
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
0.523 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
31.0000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.365 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.187 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5610 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Hubless
