부품 정보
2 puller holes, 6 bar ring holes, 6 ribs
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.625 inches and 0.625 inches and 0.851 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.656 inches and 0.656 inches and 0.812 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.375 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.376 inches and 0.381 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.000 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
3.312 inches
MRC:
The distance from the center of the bore to the bottom of the keyway(s).AEVF
Distance From Center Of Bore To Bottom Of Keyway:
Between 1.176 inches and 1.186 inches
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
34.0
MRC:
Indicates the type of face provided.ALPN
Face Type:
Step groove
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, cast
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
3
MRC:
The length of a straight line which passes through the center of the step,and terminates at the outside circumference.BCCJ
Step Outside Diameter:
9.000 inches and 7.500 inches
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Included
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
Hub End Outside Diameter And Location:
3.000 inches aa end
Distance From Outside Flange/rim To Hub End And Location:
2.812 inches aa end and 3.000 inches bb end
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
