부품 정보
Element, perimeter, 480v
TXT
묘사:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Tubular, screw plug type
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
Indicates the type of heat control included on the item.ABJM
Heat Control Type:
Thermostat
MRC:
The minimum and maximum temperature ratings through which the thermostat will operate.ABJN
Thermostat Range:
+200.0/+450.0 degrees fahrenheit
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Stud type
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
1.000 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 44.750 inches and 48.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Griddles: g-24 and g-246
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
1000.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
4
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches stud
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
32 per inch stud
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
480.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Three single voltage
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Alloy sheath is 0.375 in diam; stainless steel studs are 0.500 in.Long and heliarc welded; mica bushings are 0.250-0.375 in. Long and adhered to sheath ends using silicone adhesive; elements are clamped on to provide even heat distribution
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable sheath
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf stud
