MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
2.080 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.281 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
4.420 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.046 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Four radii sides, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
4.420 inches
Body Radius:
2.210 inches
Distance Between Holes Along Length:
2.937 inches
Distance Between Holes Along Width:
2.937 inches
Distance From First Hole Centerline To End Along Length:
0.710 inches
Distance From First Hole Centerline To End Along Width:
0.710 inches
First Recess Inside Height:
0.310 inches
Second Recess Inside Height:
1.150 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.550 inches
First Recess Diameter:
2.560 inches
Outside Corner Radius:
0.030 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron cast