부품 번호 513902-2

Flexible Shaft Coupling

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 180.32 and 243.432 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
513902-2
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
002527635
NSN
국가 주식 번호:
3010-00-252-7635 3010002527635
TXT
묘사:
Flexible Shaft Coupling
INC
INC
아이템 이름 코드:
04459
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.082 inches both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2300 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2320 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2530 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2610 inches second end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.2700 inches both ends
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.2475 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.437 inches and 1.452 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.843 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
0.3750 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19 both ends
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
No. 6/0.138 in./-32 thd size both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.3750 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.3900 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered second end
MRC:
The element, compound, or mixture of which the bellows are fabricated, excluding any surface treatmentAJGA
Bellows Material:
Stainless steel
MRC:
Indicates the design type of the item.APGF
Design Type:
Bellows
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: one hole located 90 degrees from unthreaded hole
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
2 both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Counterbore
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
0.3750 inches both ends

{lang[cimilar]} Flexible Shaft Couplings

« Torque Converters and Speed Changers {lang[catalog]}
지금 비교»
맑다 | 숨기다