부품 정보
The distance between 1st and 2nd of larger holes from either end along length is 3.500 in (nom); distance between 2nd and 3rd of larger holes from either end along length is 3.250 in (nom); the distance between larger and smaller holes is 0.300 in (nom); there are 14 0.188 in diameter holes and 28 0.125 in diameter holes; diameter of alum internally molded-in reinforcement wire is 0.0045 in
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
15.410 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.420 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
4.520 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
14.510 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.225 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.225 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.062 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
42
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
712 7000 3-002 cams (v2)
Outside Edge To Inside Edge Smallest Distance Along Width:
0.450 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
0.450 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum internally molded-in reinforcement
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicone
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
