부품 정보
0.4381 in. To 0.4383 in. Diameter of shank from head 1.73 in. To 1.76 in. Lg
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2 (r1 not required in item description)
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.4357 inches and 0.4368 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 2.543 inches and 2.548 inches
Undercut Diameter:
Between 0.410 inches and 0.414 inches
Under Head Length:
2.700 inches
Undercut Width:
Between 0.028 inches and 0.031 inches
Second Undercut Width:
Between 0.052 inches and 0.072 inches
Second Undercut Diameter:
Between 0.415 inches and 0.425 inches
First End Taper Length:
Between 0.040 inches and 0.060 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.625 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches long shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.130 inches and 0.170 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1040
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
