MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.625 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.180 inches and 0.220 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.3750 inches and 0.3754 inches
Largest Diameter Length:
Between 0.130 inches and 0.180 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
90.0
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter,and the thread location.CQBP
Screw Thread Series Designator And Location:
1st hole unc
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Taper pin pilot 2nd hole
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Threaded 1st hole
MRC:
A designation that is used for the purpose of general identification of the thread and the location.CRWB
Thread Size And Location:
0.112 inches 1st hole
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches both bearing flats
MRC:
Designates the size of the tapered pin that the item is designed to accommodate and the location.CSMJ
Tapered Pin Size Accommodated And Location:
4/0 2nd hole
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Brass, qq-b-637, alloy 462, 1/2h
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 462
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-637, alloy 462, 1/2h federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/single chamfer
