TXT
묘사:
Nonairc Component Mounting Plate
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.300 inches and 4.350 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.660 inches and 1.700 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.091 inches and 0.109 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F/a18-e/f f414 ge-400 engine
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Having one hole centered on plate with a 0.395 to a 0.415 inch diameter; having four holes, one centered on each corner approximately 0.300 to 0.310 inches from edges, each with a 0.143 to a 0.146 inch diameter; having two holes offset from center at 29 degrees across length, 1.500 inches from center, each with a 0.330 to a 0.338 inch diamter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 4911 assn standard single material response
