부품 정보
Raised surface center drilled 1.125 in. Diameter by 0.203 in. Deep w/inside corners rounded by 0.125 in radius, 0.765 in min, 0.780 in distance from center to flat on od at 180 deg
TXT
묘사:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/o aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.918 inches and 1.958 inches
Minor Thickness:
0.187 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.204 inches and 0.210 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Single bolt hole circle
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
7
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
1.625 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
0.110 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
Outside Raised Surface Diameter:
Between 1.376 inches and 1.378 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy a380.0
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-591, alloy 10 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Painted, hsp 81 hamilton std
