부품 정보
Flexible hose assembly for non-propulsion piping system
TXT
묘사:
Nonmetallic Hose Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
4.000 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees fahrenheit single response and 200.0 degrees fahrenheit single response
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.925 inches
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
30.000 inches
MRC:
The specification or standard /industrial or governmental/ that specifically covers the construction of the hose or tubing,excluding the end fittings.ADLF
Hose Or Tubing Specification/std Data:
Mil-h-24136/4a-64 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Misc parts, auxilary system ssn 0023; seawolf class ssn
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
1st layer braided polyester cord err-100 or 1st layer spirally wrapped polyamide fabric err-100
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
2nd layer braided polyester cord err-100 or 2nd layer spirally wrapped polyamide fabric err-100
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
3rd layer braided polyester cord err-100 or 3rd layer spirally wrapped polyamide fabric err-100
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
Outer layer molded rubber, synthetic err-100
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
150.0 pounds per square inch
MRC:
The type of protection provided by the outer covering.CRJM
Outer Covering Environmental Protection:
Abrasion resistant and weatherproof and oxidation resistant and light resistant
MRC:
The condition of the item with respect to the texture of the inner surface.CRWL
Inside Surface Condition:
Smooth
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
37.820 inches working and 38.960 inches working
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Includes 1 dogleg elbow 90 degree ty e and 1 90 degree elbow flange 4.000 nps ty-bv and 1 straight flange 4.000 nps ty-av; all fittings made of brass/bronze; for hose, if using spiral for reinforcement 6 layers required; if braid 3 layers required
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water single response
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
This assembly uses 1 piece of hose 37.830 inches long and 1 piece of hose 38.960 inches long. Total length measurements are minimal from 1st end straight flange to dogleg elbow, and from dogleg elbow to 2nd end elbow flange
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
Mil-h-24136/4a-64 professional/industrial association specification
