부품 정보
Large bolt hole is countersunk 100.0 porm 1.0 degrees by 0.772 in. Dia.; small bolt hole is countersunk 100.0 porm 1.0 degrees by 0.517 in. Dia.; two corners on left side along length are chamfered 0.310 in. By 45.0 porm 5.0 deg
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.880 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
2.250 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.880 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.440 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fitting, male, container tie down, semi trailer type ii
Smallest Bolt Hole Diameter:
0.257 inches
Largest Bolt Hole Diameter:
0.386 inches
Smallest Bolt Hole Quantity:
1
Largest Bolt Hole Quantity:
1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a242 assn standard single material response
