MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.250 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.312 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.8906 inches and 0.9062 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
A measurement of the amount of turning necessary to bring one hole into coincidence with another,expressed in degrees.AHYG
Angle Between Centerlines Of Securing Holes In Deg:
180.0
MRC:
Indicates the type of securing hole and the location.CQKB
Securing Hole Type And Location:
Unthreaded all holes
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Crzw
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the inside circumference,and the location.CRZW
Hole Diameter And Location:
0.1562 inches all holes and 0.1570 inches all holes
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches outside periphery
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches both bearing flats
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches inside periphery
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain round
