부품 번호:
501-6160771detail7-2c
부품 정보
0.250 in. Long 0.126 in. Min. 0.064 in. Max. Wide cut out on four ends of shoulder
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Eye
Head Inside Diameter:
Between 0.312 inches and 0.315 inches
Under Head Length:
2.875 inches
First Step Diameter:
1.438 inches
First Step Length:
0.375 inches
Second Step Diameter:
Between 0.3745 inches and 0.3748 inches
Second Step Length:
2.500 inches
MRC:
A measurement taken at right angles to the length of a head,in distinction from thickness.ABQX
Head Width:
Between 0.240 inches and 0.245 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.312 inches and 0.315 inches
Distance From Centerline Of Hole To End Of Pin:
3.375 inches
Pin Head Diameter:
0.812 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shank end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286, form 2, cond hf federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
