부품 정보
Shroud, 3rd stage segment
TXT
묘사:
Aircraft Turbine Shroud Segment
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.027 inches and 1.031 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 7.624 inches and 7.628 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
J-85 aircraft engine
MRC:
Indicates the design type of the item.APGF
Design Type:
Axial compressor
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
Indicates the location of the item on the engine section.CZBJ
Engine Section Location:
Compressor
MRC:
The number value that reflects the stage where the item is used.CZCJ
Stage Number:
3
MRC:
The number value that reflects the stage where the item is used.CZCJ
Stage Number:
4
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
T.O. 2j-j85-94
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
T.O. 2j-j85-94.Used in the compressor stator per t.O.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4027 assn standard 1st material response or ams4117 assn standard 2nd material response or ams4150 assn standard 3rd material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4027 assn standard 1st material response or ams4117 assn standard 2nd material response or ams4150 assn standard 3rd material response
