부품 정보
6 additional holes along width centrally located 10.450 in. From ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.028 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
10.970 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.900 inches
Hole Quantity Along Length:
16
Hole Quantity Along Width:
12
Distance Between Holes Along Width:
1.500 inches and 1.915 inches and 1.917 inches
Distance Between Hole Centerline And First Hole Along Length:
1.950 inches
Distance Between Hole Centerline And First Hole Along Width:
1.500 inches
Distance From First Hole Centerline To End Along Length:
2.263 inches
Distance From First Hole Centerline To End Along Width:
0.828 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.120 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.240 inches and 0.250 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Threaded hole
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Special marking
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 t651 federal specification single material response
