부품 정보
Top border red and bottom border red when positioned for reading; silver white center background strip of same width as each of the two borders w/0.062 in. H red letters fod beginning approximately one in. From left end of tape and repeated approximately eac two inches crzgja0.0120
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Cold resistant and fungus resistant and heat resistant and moisture resistant and solvent resistant and weather resistant and impact resistant
MRC:
The ability of the material to transmit light and allow visual perception.AJQE
Material Transparency:
Opaque
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
0.375 inches
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
12.000 inches
MRC:
Indicates the type of adhesive used to affix the item to another surface.ALGP
Adhesive Type:
Pressure sensitive
MRC:
The inscription affixed to or stamped on the item,excluding the part number.ATZS
Legend Inscription:
Fod
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Liner
MRC:
Indicates the type and number of cuts provided.CQNS
Cut Type And Quantity:
1 single
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Red border
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Silver white background
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic background
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic border
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
L-s-300, type 2, class 4, reflectivi type 1, silver white federal specification 1st material response background
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
L-s-300, type 2, class 4, reflectivi type 1, red, durabili type 1000 federal specification 2nd material response border
