부품 정보
4 holes are 1.000 to .750 from center hole. Cut off both ends from center of end holes after 0.38 +0 -.03. Use 2 rivets to attach each piece over 48 inch standard stock length
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.346 inches and 0.366 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.280 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.486 inches and 0.516 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.053 inches and 0.073 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 0.750 inches and 1.000 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.640 inches and 0.670 inches
Bolt Hole Centerline To Nearest Edge Distance:
Between 0.243 inches and 0.258 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5 t3 federal specification single material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-f-7179 military specification single treatment response and mil-c-5541 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/square corners
