부품 번호 4J33230-101A

Headless Straight Pin
재고 가용성  제품 상태 코드

부품 번호 4j33230-101a 다음과 같은 수량과 조건으로 재고가 있습니다.

  • NE: 1
  • NS: 1

참고: 이 항목의 가용성은 마지막으로 업데이트되었습니다. 02/21/2024 그 이후로 변경되었을 수 있습니다. 최신 가격 및 가용성에 대한 견적을 요청하십시오.

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 1496.2 and 2019.87 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
4j33230-101a
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
015207454

부품 정보
Pin-flap attachment, upper

NSN
국가 주식 번호:
5315-01-520-7454 5315015207454
TXT
묘사:
Headless Straight Pin
INC
INC
아이템 이름 코드:
02390
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
4.157 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 1.3390 inches and 1.3998 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nha 4j40101, used on ma0001a
MRC:
None.AMCS
First End Taper Length:
0.040 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
0.070 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches outside diameter
MRC:
None.CTHC
Second End Taper Angle:
45.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
1st end internal threads 0.338/.331 dia-.59 deep, csk 100 degrees x .41 dia, 3/8 - 24 unf-3b .38 deep; second end 1.400 length, 0.749 in min and 0.758 in maximum dia; through slot hole 0.300 wide, 0.191 in to 0.198 in maximum height, 1.330 in from second end; finish g-53, internal threads and holes should be coated with zinc phosphate by immersion per stp 58-302, type 1, cl 2 and overcoat solid film lubricant applied per stp 62-005, type iv, sides and ends of pin coated with karon-type b or equivalent (kamatics corp, bloomfield, ct
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6532 assn standard single material response

{lang[cimilar]} Headless Straight Pins

« Nails, Machine Keys and Pins {lang[catalog]}
지금 비교»
맑다 | 숨기다