TXT
묘사:
Power Operated Drum Winch
MRC:
The number of prime movers incorporated in the unit.AAXH
Prime Mover Quantity:
1
MRC:
The pressure required to actuate the power driven unit.ADQX
Power Drive Operating Pressure:
125.0 pounds per square inch gage
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Steam engine
MRC:
The means used to operate the item.APHE
Operation Method:
Power
MRC:
The distance between flanges on the drum,and the location on the item.ATWD
Drum Flange To Flange Distance And Location:
20.000 inches first drum and 20.000 inches second drum
MRC:
The length of a straight line which passes through the center of the drum,and terminates at the circumference,and its location on the item.ATWE
Drum Diameter And Location:
20.000 inches first drum and 20.000 inches second drum
MRC:
The length of a straight line which passes through the center of the drum flange,and terminates at the circumference,and its location on the item.ATWF
Drum Flange Diameter And Location:
33.812 inches first drum and 33.812 inches second drum
MRC:
An indication of the capstan spool/s/ mounting position.ATWG
Capstan Spool Mounting Position:
Horizontal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the capstan spool.ATWH
Capstan Spool Style:
Single head
MRC:
The design of the capstan spool surface.ATWJ
Capstan Spool Surface Design:
Plain
MRC:
The number of capstan spools included.ATWK
Capstan Spool Quantity:
2
MRC:
The total load the item is capable of moving at selected speeds and the drum location.ATWN
Load Limit At Selected Speed And Drum Location:
4250.0 pounds single speed first drum and 4250.0 pounds single speed second drum
MRC:
The distance that the item will move per minute,per specific measurement scale.ATWP
Travel Rate Per Minute:
120.0 feet
MRC:
The means by which the braking action is applied.ATWS
Braking Method:
Manual
MRC:
Indicates the type of clutch provided.ATXA
Clutch Type:
Friction
MRC:
The design on the drum surface.ATYH
Drum Surface Design:
Plain
Largest Diameter And Location:
15.000 inches first spool and 15.000 inches second spool
Overall Length And Location:
13.000 inches first spool and 13.000 inches second spool
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Any acceptable
