부품 정보
Hhead has 0.030x45 degrees chamfer. There is a radius of 0.010 inches under the head, 0.040 inches under the first and second steps. The pin is hollow and has a 0.031 inch radius in holethrough the head
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.812 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
0.2938 inches
First Step Diameter:
Between 0.8097 inches and 0.8105 inches
First Step Length:
0.350 inches
Second Step Diameter:
Between 0.670 inches and 0.674 inches
Second Step Length:
0.950 inches
Third Step Diameter:
Between 0.4974 inches and 0.4980 inches
Third Step Length:
0.452 inches
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
1 and 2
Pin Head Diameter:
0.937 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-13
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
St-05-602 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric