TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 1.373 inches and 1.374 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
2.610 inches
Undercut Diameter:
Between 1.287 inches and 1.295 inches
Under Head Length:
3.000 inches
Undercut Width:
Between 0.056 inches and 0.060 inches
Second Undercut Width:
Between 0.124 inches and 0.130 inches
Second Undercut Diameter:
1.255 inches
First End Taper Length:
0.120 inches
First End Taper Angle:
30.0 degrees
Pin Head Diameter:
1.620 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a322 assn standard single material response or astm a331 assn standard single material response or ams 6415 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
