부품 정보
1/8 by 45 degrees chamfer on straight bore complete coupling nonmagnetic
TXT
묘사:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
1.0000 inches through bore and 1.0025 inches through bore
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.9900 inches through bore and 1.9950 inches through bore
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.938 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.250 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.1560 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
11 both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.1240 inches first end and 1.1245 inches first end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.6562 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight first end
MRC:
Indicates the design type of the item.APGF
Design Type:
Internal gear
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.656 inches both ends
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and exposed coupling bolt type and standard grid spring and shrouded coupling bolt type
