부품 정보
Outer shield diameter shall compress 25 percent at compression force of 1 to 4 pounds per linear inch; inner core shall be solid with a bonded butt joint; outer shield shall be overlapped 1 - 2 turns with the end of the outside helix lap-joined (soldered) as a ; the outer shield plating shall be electrodeposited bright tin plated with 90 percent tin and 10 percent lead over a copper flash; outside of the package shall contain the following statement "retain gasket in this container until ready for use"
TXT
묘사:
Electronic Shielding Gasket
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 125.0 degrees celsius
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.761 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
4.473 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
4.761 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
T-38 aircraft
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 172 emi/rfi conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber core and silicone core
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin alloy and lead
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Circular
