부품 정보
Nut plate - jack screw, ara connector
TXT
묘사:
Spacing Threaded Standoff
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2g left internal (includes through thread)
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand left internal (includes through thread)
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.329 inches and 1.359 inches left internal (includes through thread)
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 0.11 inches and 0.14 inches
MRC:
A measurement of the longest dimension of the cross section,in distinction from width.ADWD
Cross-sectional Length:
Between 1.329 inches and 1.359 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
Between 0.735 inches and 0.765 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ea-6b
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Rectangular
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
10 left internal (includes through thread)
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.50 inches left internal (includes through thread)
Left Projection Diameter:
Between 0.621 inches and 0.624 inches
Left Projection Length:
Between 0.567 inches and 0.573 inches
Right Projection Diameter:
Between 0.735 inches and 0.765 inches
Right Projection Length:
0.649 inches
Left End Chamfer Angle:
Between 44.5 degrees and 45.5 degrees
Right End Chamfer Angle:
Between 44.5 degrees and 45.5 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Flange holes are 0.140 to 0.152 inches dia. Center to center hole distance is 0.92 along the length and 0.48 along the width. The flange is 1.188 inches long
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-679 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Projection both ends
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Acme left internal (includes through thread)
