TXT
묘사:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
3.7500 inches first end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
3.6250 inches second end
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.3750 inches second end
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.9380 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.312 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
7.625 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
2.4062 inches first end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.625 inches second end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.750 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.2810 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.3440 inches second end
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
1/2-13 both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.6240 inches both ends and 2.6250 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
4.8120 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
5.4380 inches first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered first end
MRC:
Indicates the design type of the item.APGF
Design Type:
Silent chain
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway first end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole second end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: located on top of key on straight bore end, 2-3/4 in. From end of hub
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and exposed coupling bolt type and chain cover
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
2.8740 inches first end and 2.8750 inches first end
