MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.750 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.6935 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.656 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
5.137 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
Between 0.599 inches and 0.600 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
Between 1.058 inches and 1.068 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.125 inches
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
36.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.750 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
4
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
Between 1.605 inches and 1.615 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight spline
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
Between 0.418 inches and 0.423 inches
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
2
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
Located both sides 0.19 in. Horizonal centerline, 1.25 in. Vertical centerline
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
The means by which the item is secured.BSNP
Securing Method:
Drilled hole
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
Indicates the location for securing the item.BYFF
Securing Location:
Both ends
Hub End Outside Diameter And Location:
1.000 inches both ends
Distance From Outside Flange/rim To Hub End And Location:
0.547 inches both ends
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Cadmium plated
