TXT
묘사:
Voltage Regulator
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.530 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.030 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.810 inches
MRC:
The center to center distance between mounting holes.ABTH
Center To Center Distance Between Mounting Holes:
Between 2.625 inches and 5.366 inches
MRC:
The means of attaching the item.ACUN
Mounting Method:
Fastener and pin
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-55.0/+71.0 degrees celsius
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Type no. Mg-3
MRC:
The means used for regulating the item.AMZD
Regulation Method:
Electronic
MRC:
The regulated value/s/ of the item,expressed in percent.ANBD
Regulation Percent:
0.10
MRC:
Indicates the type of input current whether alternating,direct,or both.ANPJ
Input Current Type:
Dc
MRC:
The input voltage rating at which the item is designed to operate,expressed in volts.ANPK
Input Voltage Rating In Volts:
250.0
MRC:
Indicates the type of output current whether alternating,direct,or both.ANPN
Output Current Type:
Dc
MRC:
The output voltage rating at which the item is designed to operate,expressed in volts.ANPP
Output Voltage Rating In Volts:
150.0
MRC:
The total electrical output current.ANPQ
Output Current Rating:
Between 0.0 milliamperes and 500.0 milliamperes
MRC:
An indication of the feature/s/ of the inclosure.ANPZ
Inclosure Feature:
Protected
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Four dzus fasteners on 2.625 in. By 5.366 in. Mtg centers on front panel; two 0.304 in. Diameter guide pins on 3 in. Mtg centers on rear panel
