MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.776 inches and 0.786 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 5.970 inches and 6.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.720 inches and 1.750 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
2.000 inches
Outside Edge To Bolt Hole Center Distance Along Length:
1.000 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.813 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
3
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Outer guide-mtg frame, p/n 44300-139; t/h
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
10
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.003 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 1100 or aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/1 federal specification 1st material response or qq-a-250/8 federal specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/square corners
