부품 정보
Circumferential groove on od of body, 0.875 in. Wide, 15.000 in. Dia, 0.200 in. From face opposite raised surface; two in line holes through front face, 0.271 in. Diameter min. To 0.278 in. Diameter maximum dia, 2.125 in. Center to center, 1.062 in. Right and left of vert cl; second cbore raised surface 14.745 in. Diameter min, 14.748 in. Diameter max, 0.120 in. Deep
TXT
묘사:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/ aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
17.000 inches
Minor Thickness:
0.130 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 12.970 inches and 13.030 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Single bolt hole circle
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
8
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 1.710 inches and 1.750 inches
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
14.250 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
0.450 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
Counterbore Diameter:
Between 13.748 inches and 13.756 inches
Counterbore Depth:
0.718 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, threaded
Inside Raised Surface Diameter:
Between 13.500 inches and 13.501 inches
Outside Raised Surface Diameter:
15.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
