TXT
묘사:
Instrument Mounting Bezel
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.645 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.565 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
MRC:
Indicates the type of construction.ADTS
Construction Type:
One-piece
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.750 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Threaded hole
MRC:
Designates the size of the relative or proportionate dimension of the mounting hole.AZFN
Mounting Hole Size:
0.086-56 unc-2b, 0.104 in. Diameter by 0.680 in. D cbore, 0.180 in. Diameter by 82 degrees csk
MRC:
The narrative expression used for indicating the configuration of the mounting holes.AZSY
Mounting Hole Configuration:
Holes symmetrically located on the item's bisecting horizontal plane
MRC:
The physical configuration of the dial aperture.BFBK
Dial Aperture Shape:
Rectangular w/round ends
MRC:
An indication of whether or not a knob cutout feature is included in the dial aperture.BFBM
Dial Aperture Knob Cutout Feature:
Included
MRC:
The number of knob cutouts included in the dial aperture.BFBN
Dial Aperture Knob Cutout Quantity:
1
MRC:
Designates the size of the relative or proportionate dimensions of the knob cutout(s).BFBP
Knob Cutout Size:
0.234 in. Diameter thru, 0.344 in. Diameter by 0.062 in. D cbore
MRC:
Indicates the position of the cutout(s) on the item.BFBQ
Cutout Location:
Upper lh corner
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, qq-a-225/6, alloy 2024, t4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6, alloy 2024, t4 federal specification single material response
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Chemical film, mil-c-5541
