TXT
묘사:
Engine Poppet Valve
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.1300 inches
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.0156 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.5260 inches and 1.5360 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
45.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the stem.ALYX
Stem Style:
Multi-grooved
MRC:
An indication of whether or not a groove for relief of carbon accumulation is included.ALYZ
Carbon Relief Groove:
Not included
Neck Radius:
0.3750 inches
MRC:
A measurement of the longest dimension of a stem,in distinction from width.ALZD
Stem Length:
6.2407 inches
Stem Diameter:
Between 0.3715 inches and 0.3725 inches
Distance From First Groove To Stem End:
0.2510 inches
Distance From Second Groove To Stem End:
0.4062 inches
Distance From Third Groove To Stem End:
0.9531 inches
First Groove Diameter:
Between 0.3020 inches and 0.3080 inches
Second Groove Diameter:
Between 0.3020 inches and 0.3080 inches
Third Groove Diameter:
Between 0.3460 inches and 0.3520 inches
First Groove Width:
0.0625 inches
Second Groove Width:
Between 0.0600 inches and 0.0625 inches
Third Groove Width:
0.0440 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, federal standard 66, aisi/sae 3140
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
30.0 shore scleroscope head err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
65.0 shore scleroscope tip err-100
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Diesel engine
