MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.910 inches and 1.930 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
Between 0.328 inches and 0.338 inches
First Step Diameter:
Between 0.559 inches and 0.560 inches
First Step Length:
Between 1.610 inches and 1.620 inches
Second Step Diameter:
Between 0.559 inches and 0.560 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.140 inches
Second Hole Diameter:
Between 0.270 inches and 0.272 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.800 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F119
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
36.0 rockwell c
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Boron diffusion coat to a depth of .0005 to .0012; retainer on shaft end of pin, 0.435 diameter between 1st and 2nd diameters
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 718
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
