Overall Thickness:
Between 0.159 inches and 0.169 inches
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Dental
MRC:
The means of attaching the item.ADJH
Mounting Method:
Spindle
MRC:
A substance or combination of substances used to unite and give solidity to the item.ADYW
Binder Material:
Vitreous substance
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide
MRC:
A designation indicating the rated size of the individual particles,sometimes expressed as a mesh size.AHCN
Screen Grit Size Designator:
400
MRC:
The length of a straight line which passes through the center of a spindle,and terminates at the circumference.AHDQ
Spindle Diameter:
Between 0.0624 inches and 0.0631 inches
MRC:
A measurement of the longest dimension of a spindle,in distinction from width.AHDR
Spindle Length:
0.570 inches
MRC:
A designation indicating the relative strength /holding power/ of the bond which holds the abrasive grains in place.AHDY
Abrasive Bond Grade Designation:
Any acceptable
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
Between 0.126 inches and 0.136 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Ahdq
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wheel.CZHQ
Wheel Style:
Cone, round tip w/tapered base
