TXT
묘사:
Plain Encased Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Channel
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.120 inches and 0.130 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 0.635 inches and 0.645 inches
Peripheral Diameter:
1.100 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the case.BHHL
Case Style:
Flanged
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material is vs 1-2-1-52; seal outsides style-2nd flange is thicker and wider than 1st, diameter on 1st flange is smaller than 2nd flange; 2nd flange is .026 min/.032 maximum thickness-1st flange is .020 min/.030 maximum thickness; diameter of 1st flange is 0.855; diameter of groove is .725 min/.735 max
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber fluorocarbon class fpm
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-83248 military specification single material response
