MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.160 inches
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
3000.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Barrier type
MRC:
The number of terminal rows or terminal provisions included on the item.ABCS
Terminal Row Quantity:
1
MRC:
The center to center distance between terminals.ABCT
Center To Center Distance Between Terminals:
0.375 inches
MRC:
The structural characteristic(s) of the board.ABCX
Board Construction:
Hollow construction without insulated strip
Center To Center Distance Between Mounting Facilities Parallel To Length:
11.641 inches
Center To Center Distance Between Mounting Facilities Parallel To Width:
0.312 inches
Distance From Bottom Edge Of Terminal Board To Center Of Mounting Hole:
0.281 inches
Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility:
0.141 inches
Boardlength:
11.907 inches
Boardheight:
0.484 inches
Board Height Excluding Terminals:
0.484 inches
Base Thickness:
0.328 inches
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
7.5
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 unthreaded hole
MRC:
Indicates the type of conductor connection facility/ies/ furnished on each end of a feedthru terminal.CQCW
Feedthru Connection End Type:
857 fourth combination both ends
MRC:
Indicates the type of conductor connection facility/ies/ furnished on each end of a feedthru terminal.CQCW
Feedthru Connection End Type:
F6 15th material response both ends
MRC:
The number of terminals furnished with the item which have conductor connections on each end.CRZR
Feedthru Terminal Quantity:
2 single combination
MRC:
The arrangement of terminal positions on the item.CWLG
Terminal Pattern Arrangement:
Single row
MRC:
The design of the terminal.CWLN
Terminal Design:
Feedthru
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy terminals
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic diallyl phthalate board and glass fiber board
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-19833 military specification all material responses board
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-613, comp 11 federal specification single material response terminals
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Solder terminals or tin terminals
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-t-55164 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
