부품 정보
There are also 4 other holes besides those listed in mrc. Two are at 1.50 inch from bottom edge. The first is at 14.1 inch from left length edge and 0.150 diameter. The second is at 14.6 from left length edge and 0.190 in diameter. The other two are 21.67 from the bottom edge. The first is at 8.35 inch from left length edge and the other is at 8.95 inch from left length edge. Both are countersunk 0.372 x 100 degrees.
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
22.670 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
15.850 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
8
Distance Between Holes Along Length:
4.00 inches
Distance Between Holes Along Width:
4.00 inches
Distance Between Hole Centerline And First Hole Along Length:
1.085 inches
Distance Between Hole Centerline And First Hole Along Width:
1.75 inches
Distance From First Hole Centerline To End Along Length:
1.335 inches
Distance From First Hole Centerline To End Along Width:
13.850 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.125 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
B1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
