TXT
묘사:
Dust And Moisture Seal Boot
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.125 inches
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Dustproof-nema type 13 and moisture proof
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.812 inches
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
1
MRC:
The means by which the item is sealed.ACUW
Sealing Method:
Compression
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
0.844 inches
MRC:
The length of a straight line which passes through the center of a base,and terminates at the outside circumference.AGQD
Base Outside Diameter:
1.120 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Nut
Base Inside Diameter:
0.812 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Uns
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.812 inches
MRC:
Indicates the location of the thread on the base.CSFT
Base Thread Location:
Internal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-b-5423, type a, class 3 military specification single material response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Closed end
