부품 정보
Shank offset under head, center of pin to edge of head 0.330 in. Min and 0.340 in. Maximum with a cutout 0.160 in. Min and 0.170 in. Max; groove does not go completely around
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Tee no. 3
MRC:
A measurement of the longest dimension of a head,in distinction from width.AASV
Head Length:
Between 0.715 inches and 0.725 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.247 inches and 0.248 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.685 inches and 0.695 inches
Under Head Length:
Between 0.810 inches and 0.820 inches
Undercut Width:
Between 0.100 inches and 0.110 inches
MRC:
A measurement taken at right angles to the length of a head,in distinction from thickness.ABQX
Head Width:
Between 0.445 inches and 0.455 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F100pw0229 engine/fan module
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches long end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.030 inches and 0.035 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 634
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5744 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
