부품 정보
Hole on first leg 0.050 to 0.060 in. Through and one small hole 0.190 in. Diameter to 0.210 in. Dia, countersink 80 degrees to 120 degrees, threaded 190-32 unf 3b; second leg fourth hole 0.270 in. Diameter to 0.284 in. Dia
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Counterbored and threaded
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.980 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
0.900 inches
Second Leg Width:
Between 3.420 inches and 3.460 inches
Second Leg End Width:
Between 0.600 inches and 0.640 inches
First Leg Slot Length:
Between 0.650 inches and 0.660 inches
First Leg Slot Width:
0.190 inches
Second Leg Hole Diameter:
Between 0.270 inches and 0.284 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.240 inches and 0.260 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.570 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.120 inches and 0.130 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.120 inches and 0.130 inches
First Leg Width:
3.087 inches
First Leg Distance Between Hole Centers Along Width:
2.734 inches
First Leg Distance From Edge To Hole Center Along Width:
0.353 inches
First Leg Distance From Edge To Hole Center Along Length:
0.520 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
2 slots
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Angle
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Three holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
Second Leg Offset Angle:
15.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5599 assn standard single material response or ams 5666 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset angle
