부품 정보
Dia of shank opposite cbore is 0.4362 min, 0.4364 max; both first and second step diameters are finished to aslightly smaller diameter for part of their length
TXT
묘사:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Counterbored w/o through hole
MRC:
The shortest distance from one flatted surface of the shoulder to the opposite flatted surface.AAVJ
Shoulder Width Across Flats:
0.546 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.585 inches and 1.615 inches
First Step Diameter:
Between 0.600 inches and 0.620 inches
First Step Length:
Between 0.038 inches and 0.042 inches
Second Step Diameter:
Between 0.5459 inches and 0.5461 inches
Second Step Length:
Between 0.620 inches and 0.640 inches
Third Step Diameter:
Between 0.4722 inches and 0.4820 inches
Third Step Length:
Between 0.500 inches and 0.540 inches
Second End Counterbore Diameter:
Between 0.323 inches and 0.333 inches
Second End Counterbore Depth:
Between 0.940 inches and 0.960 inches
First End Taper Length:
Between 0.040 inches and 0.060 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
Indicates the location of the first end.CRDY
First End Location:
Chamfered end
First End Taper Angle:
Between 28.0 degrees and 32.0 degrees
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5663 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
