부품 정보
Holes countersunk 0.335 in. Min, 0.355 in. Maximum diameter by 90 degrees inclination
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.203 inches and 0.210 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.620 inches and 1.630 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 1.430 inches and 1.440 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
Between 0.060 inches and 0.080 inches
Hole Quantity Along Length:
2
Distance Between Holes Along Length:
Between 1.055 inches and 1.065 inches
Distance From First Hole Centerline To End Along Length:
Between 0.185 inches and 0.190 inches
Distance From First Hole Centerline To End Along Width:
Between 0.307 inches and 0.317 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.086 inches and 0.094 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
